Controls the two 7-segment displays on the board.
More...
Functions |
int8_t | sb_7seg_showNumber (int8_t nmbr) |
| prints a number in the range [-9; 99] on the 7-segment display
|
int8_t | sb_7seg_showHexNumber (uint8_t nmbr) |
| prints the hexadecimal representation of an 8-bit unsigned integer on the 7-segment display
|
int8_t | sb_7seg_showStr (char *str) |
| prints a 2 character string on the 7-segment display
|
void | sb_7seg_disable (void) |
| disables the 7-segment displays
|
Detailed Description
Controls the two 7-segment displays on the board.
The two 7-segment displays of the SPiCboard share one common port of the MCU. The two displays can be connected and disconnected from the port using two transistors. By quickly and periodically connecting and disconnecting the displays an observer will not be able to notice when a display is disabled and both displays can be used apparently simultaneously.
- Note
- As the timer-library is used, interrupts must be enabled for the display to work
- See Also
- timer.h
Function Documentation
void sb_7seg_disable |
( |
void |
| ) |
|
disables the 7-segment displays
Any running alarms are unregistered.
int8_t sb_7seg_showHexNumber |
( |
uint8_t |
nmbr | ) |
|
prints the hexadecimal representation of an 8-bit unsigned integer on the 7-segment display
- Parameters
-
- Return values
-
int8_t sb_7seg_showNumber |
( |
int8_t |
nmbr | ) |
|
prints a number in the range [-9; 99] on the 7-segment display
- Parameters
-
- Return values
-
0 | success |
-1 | nmbr is smaller than -9 |
-2 | nmbr is greater than 99 |
int8_t sb_7seg_showStr |
( |
char * |
str | ) |
|
prints a 2 character string on the 7-segment display
Supported characters are in the group [-_ 0-9ACE-JLPRUXb-dhnoru] (contains space). Read this article for possible representations of these characters. Two characters of the set should never have the same representation.
- Parameters
-
str | the 0-terminated string |
- Return values
-
0 | success |
-1 | character at position 0 not printable |
-2 | character at position 1 not printable |
-3 | both characters not printable |
-4 | str is an empty string |